Stm32f469ni stm32f469i-disco: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=== Programming === Note: this board may have issues being prgrammed with QSTlink and by copying the bin file in USB drive mode. If this is the case, use [https://github.com/...") |
No edit summary |
||
| Line 1: | Line 1: | ||
== Programming == | |||
Note: this board may have issues being prgrammed with QSTlink and by copying the bin file in USB drive mode. | Note: this board may have issues being prgrammed with QSTlink and by copying the bin file in USB drive mode. | ||
| Line 9: | Line 9: | ||
Thanks to Antonio Di Bello for the tip. | Thanks to Antonio Di Bello for the tip. | ||
== Reading printf output == | |||
The board default serial port is connected to the ST-Link, so the same USB cable used for powering and programming can be used for serial communication. Open a terminal and type ''screen /dev/ttyACM0 19200'' | |||
Latest revision as of 22:54, 21 December 2018
Programming
Note: this board may have issues being prgrammed with QSTlink and by copying the bin file in USB drive mode. If this is the case, use st-flash
st-flash write ./main.bin 0x08000000
Thanks to Antonio Di Bello for the tip.
Reading printf output
The board default serial port is connected to the ST-Link, so the same USB cable used for powering and programming can be used for serial communication. Open a terminal and type screen /dev/ttyACM0 19200