View source for Stm32f469ni stm32f469i-disco

== Programming ==

Note: this board may have issues being prgrammed with QSTlink and by copying the bin file in USB drive mode.
If this is the case, use [https://github.com/texane/stlink st-flash]

<source lang="bash">
st-flash write ./main.bin 0x08000000
</source>

Thanks to Antonio Di Bello for the tip.

== Reading printf output ==

The board default serial port is connected to the ST-Link, so the same USB cable used for powering and programming can be used for serial communication. Open a terminal and type ''screen /dev/ttyACM0 19200''